This modification replaces the compound slide with a solid cast-iron block. The purpose of this is to make the cutting tool MUCH more stable. The compound slide has looseness and limits the lathe performance. Below is the build steps that are required.
Block dimensions are as follows;
Material = Gray Cast Iron
Dimensions = 4.8″w x 5.25″d x @.5″ h
Screws = 3/8-16 x 1.5″ SHCS
Weight = 13.25 Lbs.
A drawing for the block can be found here.
The block was designed to use either my Aloris BXA QCTP or a MultiFix QCTP which allows full access to all tools and holders in inventory.